Eureca construction kit for spectrometers

3D-printed parts for reproduction

On this page you will find information about the 3D printed parts that are used in our construction kit for modular optoelectronic setups.

This can be used to rebuild the experiments that we publish in loose sequence as part of our application examples for our line scan cameras. In addition to the step files for a quick reprint, the FreeCad files are also freely available, so that modifications of the 3D printed parts are easily possible in order to adapt an experiment to one's own needs.

To print the parts, we use a Prusa i3 MK3 3D printer and PLA filament internally. If you have any questions about the printer settings used, we will be happy to help.

The assembly instructions of the modules, the complete spectrometers as well as the application examples published so far can be found on separate subpages.

Type	Designation	Description
3D-0020	3D-0020	Baseplate 40 mm long For mounting holders for optoelectronic components on a 20 mm aluminum profile
3D-0040	3D-0040	Baseplate 60 mm long For mounting holders for optoelectronic components on a 20 mm aluminium profile
3D-0041	3D-0041	Baseplate 60 mm long For mounting holders for optoelectronic components on a 20 mm aluminium profile; offset mounting hole in contrast to model 3D-0040
3D-0060	3D-0060	baseplate 80 mm long For attaching of holders for optoelectronic components on a 20 mm aluminium profile
3D-1010	3D-1010	bottom cap 20 mm Serves with glued on rubber buffer as slip protection and for the damping of vibrations
3D-1020	3D-1020	end cap 20 mm As shock protection and as protection against loss of loose sliding blocks
3D-1030	3D-1030	Floor mounting left For fastening a profile to a base such as a housing plate.
3D-1031	3D-1031	Floor mounting right For fastening a profile to a base such as a housing plate.
3D-2001	3D-2001	holder for optical components size 25 mm round Is screwed onto a suitable baseplate
3D-2011	3D-2011	tilting holder for optical components size 25 mm round Suitable for the baseplate 3D-2090
3D-2090	3D-2090	Baseplate for tiltable component holders for e. g. 3D-2011
3D-2101	3D-2101	holder for optical components size 25 × 25 mm Is screwed onto a suitable baseplate
3D-3002	3D-3002	Light guide adapter for Thorlabs slit For attaching a fiber optic with SMA connector to a slit holder
3D-4100	3D-4100	bottom part for line scan camera housing For e9u-LSMD-1304 series line scan cameras
3D-4110	3D-4110	lid for line scan camera housing For e9u-LSMD-1304 series line scan cameras; fits 3D-4100
3D-5010	3D-5010	Spacer 15 × 10 mm to adjust the height of a component relative to the baseplate
3D-5105	3D-5105	Spacer 25 × 5 mm to adjust the height of a component relative to the baseplate
3D-5391	3D-5391	Spacer 45 × 12.2 mm to adjust the height of a component relative to the baseplate