MENU
| Description | Line scan camera board with sensor without cover glass |
| Articlenumber (Eureca): | 02.29.0031 |
| Origin: | Germany |
| Manufacturer: | Eureca |
| EAN | 0675051081799 |
| Interface | UART |
| Sensor | TCD1304DG |
| Pixel number | 3648 |
| Pixel pitch | 8 µm |
| Pixel height | 200 µm |
| Minimum Exposure Time | 20 µs |
| Supply Current | < 250 mA |
| Supply Voltages | 3.3 V |
| Size (L×B×H) | 61 × 25 × 12 mm |
| Weight | 25 g |
| Remark | UART Version: serial interface, without cover glass; erhältlich ab Q2/2026 |
Sample picture
Line scan camera module with serial interface. The values given here are for 8-bit mode. This camera board can also be operated in 12-bit mode.
Hardware development has been completed and series production is being prepared (planned start: Q2/2026). We are currently polishing libraries, drivers, and documentation. Anyone who would like to get involved early on and provide feedback can already purchase prototypes as e9u-LSMD-TCD1304-UART-EVAL at reduced prices.
| Operation mode | 8-bit mode | 12-bit mode |
|---|---|---|
| Digitization Depth | 8 bit | 16 bit left aligned |
| Read out noise (typ. rms) | 300 e− | 50 e− |
| Linear Full Well Capacity | 40 ke− | 40 ke− |
| Full Scale Capacity | 65 ke− | 65 ke− |
| Conversion Gain (typ @ 0.4 FS) | @ 8 Bit: 330±100 e−/LSB | @ 16 Bit: 1.3±0.4 e−/LSB |
| Maximum Frame Rate | (Baudrate / 40000), max. 25 fps | 25 fps |
| External Trigger Input | ✓ | ✓ |
| External Trigger Latency | 20 µs | 20 µs |
| External Trigger Jitter | ±10 µs | ±10 µs |
| External Trigger Latency (debounced) | ✗ | ✗ |
| Isolated external Trigger Input | ✗ | ✗ |
| External Exposure Time Control | ✗ | ✗ |
| Exposure Time Control Latency | ✗ | ✗ |
| Minimum External Exposure Time | ✗ | ✗ |
| Maximum External Exposure Time | ✗ | ✗ |
| Exposure Time Control Latency (debounced) | ✗ | ✗ |
| Minimum External Exposure Time (debounced) | ✗ | ✗ |
| Trigger Output | ✓ | ✓ |
| High Resolution Timestamp: Trigger | ✗ | ✗ |
| GPIO | ✗ | ✗ |
| Enhanced Frame Buffer | ✗ | ✗ |
This module uses the TCD1304DG sensor without the standard cover glass (TCD1304DG-X) and is therefore suitable for measurement tasks that would otherwise cause interference or reflections on the cover glass. Examples include: Beam profile analysis or applications using coherent light sources.
The cover glass is removed internally at Eureca using a specially developed process. After removing the cover glass, all sensors are tested for their function on the respective camera module and taped with a protective film for transport. This must be removed before using the module. If you need permanent protection, we recommend a cover with quartz glass (TCD1304DG-Q).
Since the sensor is socketed, it can easily be replaced by another sensor version if required. This can e. g. be the sensors in the standard version. However, sensors coated with Lumogen to expand the usable spectral range into UV or sensors with special filters are also possible.
After replacing the sensor, the module must be recalibrated. A special automatic program is available for this, which is included in the scope of delivery of the modules.
For some of these variants, there are already module versions with the corresponding preinstalled modified sensors. You will find a corresponding list at the end of this page.
More pictures of the product:
Other versions of the article and matching products:
Changes to the specifications by the manufacturer are possible without prior notice. Please contact us if needed or interested. We also advise you on the suitability of the product for a particular application and provide you with an individual price quote.
Last update: 11.21.2025
Here you can easily ask a question or inquiry about our products:
EURECA Messtechnik GmbH
Deutz-Kalker Straße 35, D-50679 Köln
Phone: +49 (0)221 952629-0
Fax: +49 (0)221 952629-9
info(at)eureca.de
www.eureca.de
