Cooling Systems
Peltier Elements
Seebeck Elements
(TEGs)
Heat Conducting and
Isolating Prodcuts
Heat Sinks
Heat Exchanger
Fans
Heat conducting film
Power Supplies
Services
Startseite Optoelectronic Optics Cooling Sockets Consulting Deutsch English Impressum Kontakt AGB

Thermally Conductive Adhesives, Pastes and Sealing Mass

EURECA offers a range of materials for processing of peltier elements, coolers and accessories. Available are extremely good heat conducting one-and two-component silicone pastes a well as a low thermal conductive single-component polyurethane adhesive.

For closer details please refer to the list below. In case of questions we are happy to give you technical advise!


Technical Data

  TCSC-3300 TCSA-1530 TCSG-1500 TCSA-0770 PUSA-0100
Thermal and General Technical Data
Heat Conductivity [W/Km] 3.3 1.53 1.50 0.77 0.10
Temperature Range [°C] -45 / +200 -55 / +150 -60 / +150 -150 / +150 -40 / +150
Mechanical Data
Final Consistency pasty solid gel solid solid
Colour grey white grey grey white
Specific Weight [Kg/dm3] 3.5 2.59 2.77 2.14 1.38
Tensile Strength [Mpa] - 4 - 7 3
Linear Expansion [1/K] - 1 × 10-4 1 × 10-4 1 × 10-4 1 × 10-4
Breaking Elongation [%] - 50 100 55 80
Material Thickness [mm] - - 0.5/1/2/3 - -
Electrical Data
Restivity [Ω] 3,7 × 1011 1 × 1014 1 × 1012 1 × 1013 1 × 1012
Disruptive Strength [kV/mm] 5 13 10 26 5
Storage
Storing Temperature [°C] 25 4 25 4 4
With Drier - x - - x
Durability [Months] - 3 - 3 3
Processing
Viscosity [mPa ×s] 10×103 19×103 - 4.7×103 -
Work Life (20°C) [min] - 4 - 1800 5
Mixing Ratio - - - 1:1 -
Curing Temperature [°C] - ≥20 - ≥90 ≥20
Curing Time - 3 mm/24h - 3h 3mm/24h

More detailed information you will find in our pdf data sheet.


Page updated at: 08/22/2013